Color Cosmetics, Skin Care

Corrective Aqua Concealer Stick

Company Logo

Released By Lubrizol Life Science

Corrective Aqua Concealer Stick
Ingredients
%

Phase A

  • Water (Deionized water)
  • 10.70
  • Butylene glycol
  • 3.00
  • Phenoxetol (Clariant) (Phenoxyethanol)
  • 0.30
  • Eyeseryl Peptide Solution (Lipotec SAU) (Water (and) butylene glycol (and) acetyl tetrapeptide-5)
  • 5.00
  • Avalure Flex-6 Polymer (Lubrizol Advanced Materials) (Polyurethane-62 (and) trideceth-6)
  • 1.00

Phase B

  • Schercemol NGDO Ester (Lubrizol Advanced Materials) (Neopentyl glycol diethylhexanoate)
  • 29.25
  • Schercemol DID Ester (Lubrizol Advanced Materials) (Diisopropyl dimer dilinoleate)
  • 10.00
  • Unipure White LC 987 AS-EM (Sensient) (CI 77891 (and) triethoxycaprylylsilane)
  • 13.75
  • Unipure Yellow LC 182 AS-EM (Sensient) (CI 77492 (and) triethoxycaprylylsilane)
  • 1.60
  • Unipure Red LC 381 AS-EM (Sensient) (CI 77491 (and) triethoxycaprylylsilane)
  • 0.50
  • Unipure Black LC 989 AS-EM (CI 77499 (and) triethoxycaprylylsilane)
  • 0.15
  • RonaFlair Boroneige SF-6 (Merck KGaA) (Boron nitride)
  • 4.00
  • RonaFlair LDP White (Merck KGaA) (Titanium dioxide (and) sodium potassim aluminium silicate (and) tin oxide)
  • 1.00
  • EL-8051 IN Silicone Organic Elastomer Blend (Dow Corning) (Isodecyl neopentanoate (and) dimethicone/bisisobutyl PPG-20 crosspolymer)
  • 3.00

Phase C

  • Cerozo RS HA/C (Baerlocher) (Ozokerite)
  • 11.00
  • Kahlwax 2811 (Kahlwax) (Oryza sativa (rice) bran wax)
  • 4.00

Phase D

  • Vitamine E Acetate (Tocopheryl acetate)
  • 0.50
  • Allergen Free Aloe Vera (Sensient) (Fragrance)
  • 0.25
  • Xiameter PMX-200 5 cs (Dow Corning) (Dimethicone)
  • 1.00

Procedure

Weigh the ingredients of part A except the Avalure Flex-6 polymer and heat to 50°C, then add slowly Avalure Flex-6 polymer until complete dispersion then raise the temperature to 90°C (it can prepared the day before). Add part B ingredients one at a time in a suitable vessel under homogenizer at 3000 rpm for 10 minutes while heating to 100°C. Weigh part C and heat it to 100°C. Add part B to part C then add the ingredients of part D. Make the emulsion by quickly adding part B/C/D to part A at 600 rpm. Keep the bulk at 90°C until emulsion is completed. Fill the pre-heated and siliconed molds.

Properties

Appearance—Beige stick; Stability—Passed 1 month @ 50°C, 40°C, 4°C and 25°C and 5 freeze/thaw cycles; Avalure Flex-6 Polymer (wt% TS)—1.00

More Information

Lubrizol Tel: 800-379-5389 or 216-447-5000 Website: www.lubrizol.com/personal-care

Request more information from Lubrizol Life Science