Color Cosmetics, Hair Care, Skin Care

Jump Start the Day Gel Primer

Released by Lonza Consumer Care

Company Logo

Released By Arxada

Jump Start the Day Gel Primer
Ingredients
%

Phase A

  • Deionized Water
  • q.s. Lonza Consumer Care 0.20 – 1.00 – 0.50 Lubrizol 0.55 Lonza Consumer Care 0.50 Lonza Consumer Care 0.50 BASF 2.00 Lonza Consumer Care 1.00 – 1.10 – 5.00 Lonza Consumer Care 0.50 Lonza Consumer Care 1.00 Lonza Consumer Care 2.00
  • SeaPure Agarose (Agarose) (Lonza Consumer Care)
  • 0.20
  • Glycerin
  • 1.00
  • Butylene Glycol
  • 0.50
  • Carbopol 2050 (Carbomer) (Lubrizol)
  • 0.55

Phase B

  • Natrulon H-6 (Polyglycerin-6) (Lonza Consumer Care)
  • 0.50
  • Natrulon H-10 (Polyglycerin-10) (Lonza Consumer Care)
  • 0.50
  • Cetiol CC (Dicaprylyl Carbonate) (BASF)
  • 2.00
  • Marula Oil (Sclerocarya Birrea Seed Oil) (Lonza Consumer Care)
  • 1.00
  • TEA, 99% (Triethanolamine)
  • 1.10

Phase C

  • Deionized Water
  • 5.00
  • Niacinamide USP (Niacinamide) (Lonza Consumer Care)
  • 0.50
  • Carnipure Crystalline (Carnitine) (Lonza Consumer Care)
  • 1.00
  • LaraCare A200 (Galactoarabinan) (Lonza Consumer Care)
  • 2.00

Phase D

  • Mikrokill COS (Phenoxyethanol (and) Caprylyl Glycol (and) Chlorphenesin) (Lonza Consumer Care)
  • 0.75
  • D&C Green 5, 0.2% solution (D&C Green 5) (Sensient)
  • 0.20
  • Water Sleep Time Mask Type 61434 (Fragrance) (Chemia Fragrance & Flavor)
  • 0.20

Procedure

1. Charge water of Phase A into main vessel and heat to 85°C. Add glycerin and butylene glycol of Phase A to main vessel. 2. Sprinkle SeaPure Agarose rheology modifier of Phase A to main vessel. Hold temperature and mix well for 30 minutes. 3. Add Carbopol of Phase A to main vessel and allow to mix for 10 minutes. 4. Add ingredients of Phase B (except for TEA) to main vessel. Remove from heat and mix well for 15 minutes. 5. Add TEA from Phase B to main vessel. Mix well until homogeneous. 6. Pre mix ingredients of Phase C in a separate vessel. Mix until clear solution forms. 7. When main vessel has reached ~40°C, slowly add Phase C. Mix until homogeneous. 8. Add ingredients of Phase D into main vessel. Cool to room temperature.

Properties

pH: 6.5–7.5. • Viscosity: 40,000–50,000cps Spindle TE @ 10rpm (25°C after 24 hours) • Appearance: Light blue lotion

Request more information from Arxada