Hair Care, Skin Care

Arctic Air After Shave Serum

Released by Lonza Consumer Care.

Company Logo

Released By Arxada

Arctic Air After Shave Serum
Ingredients
%

Phase A

  • Deionized Water
  • q.s.
  • LaraCare A200 (Galactoarabinan) (Lonza Consumer Care)
  • 2.00
  • Butylene Glycol
  • 1.50
  • Geogard LSA (Butylene Glycol (and) Benzyl Alcohol (and) Sorbic Acid (and) Caprylic/Capric Triglyceride (and) Lauryl Alcohol (and) Myristyl Alcohol) (Lonza Consumer Care)
  • 1.00
  • Carbopol Ultrez 21 (Acrylates/C10-30 Alkyl Acrylate Crosspolymer) (Lubrizol)
  • 0.25
  • Carbopol 2050 Polymer (Carbomer) (Lubrizol)
  • 0.15

Phase B

  • Gel Base BSM5 (Cyclomethicone (and) Dimethicone (and) Phenyl Trimethicone) (Lonza Consumer Care)
  • 3.00
  • Gel Base Sil (Cyclomethicone (and) Dimethicone) (Lonza Consumer Care)
  • 1.00
  • Cetiol CC (Dicaprylyl Carbonate) (BASF)
  • 3.00
  • Natrulon H-6 (Polyglycerin-6) (Lonza Consumer Care)
  • 0.50
  • Natrulon H-10 (Polyglycerin-10) (Lonza Consumer Care)
  • 0.50
  • TEA, 99% (Triethanolamine)
  • 0.30

Phase C

  • Deionized Water
  • 5.00
  • Niacinamide USP (Niacinamide) (Lonza Consumer Care)
  • 0.50
  • Carnipure Crystaline (Carnitine) (Lonza Consumer Care)
  • 1.00

Phase D

  • SD Alcohol 40-B (SD Alcohol 40-B) (Grains Processing)
  • 2.50
  • Rapithix A-60 (Trideceth-6) (Ashland)
  • 1.25
  • Moisture Blast Fragrance 062760 (Fragrance) (Chemia Fragrance & Flavor)
  • 0.20
  • Glycosperse L-20 KFG (Polysorbate 20) (Lonza Consumer Care)
  • 0.40

Procedure

1. Charge water of Phase A into main vessel. Add LaraCare® A200 active of Phase A to the main vessel and begin mixing. 2. Add remaining ingredients of Phase A to main vessel in order listed, mixing well between each ingredient addition. Mix until homogenous. 3. Add ingredients of Phase B to main vessel in order listed, mixing well between each ingredient addition. Mix until homogeneous. 4. Pre-mix ingredients of Phase C in a separate vessel. Mix until a clear solution forms. 5. Add Phase C to the main vessel. Mix until homogeneous. 6. Add Rapithix A-60 of Phase D to the main vessel. Mix until homoge- neous. 7. Slowly add alcohol of Phase D to the main vessel. Mix until homog- enous. 8. Pre-mix Glycosperse L-20 solubilizer and fragrance of Phase D in a separate vessel. Add to the main vessel. Mix until homogeneous.

Properties

pH: 5.0–6.0 • Viscosity: 20,000 – 25,000cps Spindle #5 @ 10rpm (25°C after 24 hours) • Appearance: White lotion

Request more information from Arxada