Skin Care

Morning Call Moisturizing Serum

Company Logo

Released By Lubrizol Life Science

Morning Call Moisturizing Serum
Ingredients
%

Phase A

  • Deionized water
  • 68.345
  • Versene Na2 (Dow) (Disodium EDTA)
  • 0.100
  • FD&C Green #3 (Hilton Davis/Emerald) (0.1 wt % solution) (Green 3)
  • 0.020
  • Avalure Flex-6 Polymer (Lubrizol Adv. Materials) (Polyurethane-62 (and) trideceth-6)
  • 0.100
  • Carbopol Ultrez 30 Polymer (Lubrizol Advanced Materials) (Carbomer)
  • 0.400

Phase B

  • Sodium hydroxide (VWR) (18% solution)
  • 0.185

Phase C

  • 1, 3 Butylene glycol (Ruger) (Butylene glycol)
  • 10.000
  • Glycerin (Essential Ingredients)
  • 10.000
  • Reproage Peptide (Lipotec SAU) (Water (Aqua) (and) disodium phosphate (and) acetyl hexapeptide-8 (and) sodium phosphate (and) caprylyl glycol)
  • 2.000
  • Lipomoist 2013 Molecular Film (Lipotec SAU) (Water (aqua) (and) xanthan gum (and) caprylyl glycol (and) phenoxyethanol (and) glucose (and) chondrus crispus (carrageenan) extract (and) ethylhexylglycerin)
  • 7.000
  • Microcare PHG (Thor) (Caprylyl glycol (and) phenoxethanol)
  • 0.500

Phase D

  • Hydramol TGL Ester (Lubrizol Adv. Materials) (Polyglyceryl-3 laurate)
  • 1.000
  • Garden Dew #129U22 (Flavors & Fragrance Specialties) (Fragrance)
  • 0.050

Phase E

  • Sodium hydroxide (18% solution)
  • 0.300

Procedure

To a suitable vessel, add the disodium EDTA to heated deionized water (35°C to 40°C) with moderate mixing with a marine blade. When disodium EDTA is dissolved, add the color then sprinkle the Avalure Flex-6 polymer into the vortex without aeration. When uniform, discontinue heat and sprinkle Carbopol Ultrez 30 polymer into vortex. Mix until all solids are dispersed. When part A is uniform, partially neutralize with sodium Hhydroxide. When uniform, add part C ingredients in order, mixing well in between additions. In a separate vessel, add the fragrance to the HydramolTM TGL ester (may be necessary to slightly warm the TGL), mix until uniform. When uniform, add to main vessel, mix well. When uniform, adjust pH up into range with sodium hydroxide.

Properties

Appearance—Light green opaque gel; pH—5.4-6.3; Viscosity (mPa•s) Brookfield® RVT DVII Viscometer (Brookfield Ametek, Inc.) spindle #6 @ 20 rpm, 1 minute, RT —10,000-16,000 Recommended Packaging—Jar; Stability—Passed 4 weeks at 50 °C, Passed 12 weeks at 25 & 45 °C, Passed 5 freeze/thaw cycles.

More Information

Lubrizol Advanced Materials Tel: 800-379-5389, 216-447-5000 Website: www.lubrizol.com/personal-care

Request more information from Lubrizol Life Science

Topics