Skin Care, Sun Care

Go And Glow Sunscreen

Coast Southwest's formula includes soothing Lumiglow and Bluscreen extracts.

Company Logo

Released By Coast Southwest, Inc.

Go And Glow Sunscreen
Ingredients
%

Phase A

  • Water
  • 30.45
  • Dissolvine NA2-S (Disodium EDTA)
  • 0.10
  • V Allantoin (Coast Southwest Inc., 3V Sigma USA) (Allantoin)
  • 0.05
  • Endicare SC-530 (Coast Southwest) (Polyethyloxazoline)
  • 1.00

Phase B

  • Endimate 163 (Coast Southwest) (Ethylhexyl tearate (and) ethylhexyl palmitate (and) diethylhexyl adipate)
  • 8.00
  • JD Jojoba Butter (Coast Southwest Inc., Jojoba Desert (A.C.S) Ltd) (Simmondsia chinensis (Jojoba) seed oil(and) cera alba (and) hydrogenated vegetable oil)
  • 0.50

Phase C

  • Olivatis 21 (Coast Southwest Inc., Medolla Specialty Chemicals) (Olive oil PEG-6 esters) (and) olive oil polyglyceryl-6 esters)
  • 4.00
  • Olivatis 18 (Coast Southwest Inc., Medolla Specialty Chemicals) (Olive oil Polyglyceryl-6 esters (and) sodium stearoyl lactylate (and) cetearyl alcohol)
  • 7.00
  • Glyceryl Tribehenate
  • 0.35

Phase D

  • Dispersion 108321 (Coast Southwest Inc. Dynamic Cosmetics, Inc.
  • 8.50
  • Boron Nitride FF (Boron nitride)
  • 0.30

Phase E

  • Dispersion 120128 (Coast Southwest Inc. Dynamic Cosmetics, Inc.)
  • 35.00

Phase F

  • umiglow (Coast Southwest Inc., Novachem S.R.L.) (Water (and) glycerin (and) Aristotelia chilensis fruit extract)
  • 2.00
  • Bluescreen (Coast Southwest Inc., Novachem S.R.L.) (Water (and) glycerin (and) alcohol (and) sodium PCA (and) Plantago lanceolata leaf extract (and) Fabiana imbricata leaf/stem extract (and) Verbascum thapsus extract (and) Achyrocline satureioides flower extract)
  • 2.00

Phase G

  • Sharomix EG14 (Coast Southwest Inc., Sharon-Laboratories Ltd.) (Ethylhexylglycerin (and) phenoxyethanol)
  • 0.75

Procedure

Phase A - In main vessel, weigh out Phase A, mix and heat to 65℃ to 70℃. Phases B/C - In side vessel, add Phase B followed by Phase C and heat to 65℃ to 70℃ with mixing. Phase D - Once Phase B/C reaches temperature, add Phase D. Mix until uniform. When Phases A and D are at temperature, add Phase D to Phase A with moderate shear mixing. Discontinue heat when the solution is uniform. Allow the batch to cool to 50℃. Phase E - Add Phase E. Mix until dispersed completely. Allow the batch to cool to 40℃ to 45℃. Phase F - Add Phase F. Mix until uniform. Phase G - Add Phase G and cool batch to 25℃ to 30℃ to transfer.

Properties

pH: 6 to 7; viscosity: #4 @ 30 rpm (25℃) - 2,000 to 5,000 cst.

More Information

Coast Southwest, Inc. 1-800-621-0500

Request more information from Coast Southwest, Inc.