BOV, High SPF Mineral Sunscreen Spray

This format makes application easy for consumers.

Released By Essential Ingredients

BOV, High SPF Mineral Sunscreen Spray
Ingredients
%

Phase A

  • Polyhydroxystearic Acid
  • 0.40
  • Enhance U-S (ADP Cosmetics) (Zinc Oxide (and) Titanium Dioxide (and) Silica)
  • 17.00
  • Solvlent + SPF Booster (Butyloctyl Salicylate)
  • 5.00
  • Fancol ID-CG (Isododecane)
  • 20.00

Phase B

  • Cetyl PEG-PPG-10/Dimethicone
  • 4.50
  • Solamaze Natural (Nouryon) (Diisostearoyl Polyglyceryl-3 Dimer Dilinoleate (and) Caprylic/Capric Triglyceride)
  • 3.33

Phase C

  • Water
  • 46.57
  • Amaze XT (Nouryon) (Dehydroxanthan Gum)
  • 0.10
  • Sodium Chloride
  • 0.10

Phase D

  • Dry-Flo TS (Nouryon) (Tapioca starch (and) Polymethylsilsesquioxane)
  • 2.00
  • Esept 9010 (Phenoxyethanol (and) Ethylhexylglycerine)
  • 1.00

Procedure

In an empty beaker, add Polyhydroxystearic acid, Butyloctyl Salicylate and Isododecane and heat to 50°C to ensure the Polyhydroxystearic acid has melted. Add Enhance U-S under homogenization and continue homogenization at 4,000rpm for 20 minutes or until a uniform dispersion is obtained. Move to overhead stirrer once complete. Slowly sprinkle Amaze XT into the water phase of the formula and mix at 500-550rpm to ensure complete dispersion and swelling. Ensure no air is trapped. Once Amaze XT is completely dispersed, add the sodium chloride. A drop in viscosity will be noticed. Slowly add the water phase to the oil phase and continue mixing the batch under prop blade at 500-600rpm. Once the phases are mixed, homogenize at 3,500rpm for 10-15 minutes. Add Dry-Flo TS and the Phenoxyethanol (and) Ethylhexylglycerine under sweep mixing after homogenization. Mix at 100-120rpm.

Properties

Appearance: White liquid. Viscosity (RT): 1000-1500cPs. Static SPF: 56.2.

More Information

Essential Ingredients www.essentialingredients.com

Request more information from Essential Ingredients