Color Cosmetics

Serum Foundation Shade Medium

Company Logo

Released By Gattefosse Corporation

Serum Foundation Shade Medium
Ingredients
%

Phase A

  • Emulium Illustro (Gattefosse) (Polyglyceryl-6 Polyhydroxystearate, Polyglyceryl-6 Polyricinoleate, Polyglycerin-6)
  • 4.50
  • Labrafac CC MB (Gattefosse) (Caprylic/Capric Triglyceride)
  • 8.00
  • Cetiol C5 (BASF) (Coco-Caprylate)
  • 8.00
  • Preservative
  • 1.00

Phase B

  • Bentone Gel GTCC V (Elementis) (Caprylic/Capric Triglyceride, Stearalkonium, Hectorite, Propylene Carbonate)
  • 7.00

Phase C

  • Unipure White LC 981 HLC (Sensient) (Titanium dioxide, Hydrogenated Lecithin)
  • 9.00
  • Unipure Yellow LC 182 HLC (Sensient) (CI 77492, Hydrogenated Lecithin)
  • 1.25
  • Unipure Red LC 381 HLC (Sensient) (CI 74491, Hydrogenated Lecithin)
  • 0.20
  • Unipure Black LC 989 HLC (Sensient) (CI 77499, Hydrogenated Lecithin)
  • 0.08
  • Cetiol CC (BASF) (Dicaprylyl Carbonate)
  • 7.00
  • Emulium Illustro (Gattefosse) (Polyglyceryl-6 Polyhydroxystearate, Polyglyceryl-6 Polyricinoleate, Polyglycerin-6)
  • 0.50

Phase D

  • Demineralized Water
  • 39.27
  • Magnesium Sulfate (99%)
  • 2.00
  • Sodium Chloride, Codex
  • 1.00
  • Glycerin
  • 2.00

Phase E

  • Jeechem NDA-LC (Vantage) (C9-12 Alkane)
  • 5.00
  • Perfume Fresh Blossom RS45193 (Technico-Flor)
  • 0.20

Phase F

  • Amihope LL (Ajinomoto)
  • 1.00

Phase G

  • Gatuline Radiance (Gattefosse) (Propanediol, Evodia Rutaecarpa fruit extract)
  • 3.00

Procedure

Cold process: Weight oil phase A and mix ingredients until everything is homogeneous. Add phase B and disperse with rotor stator until homogeneous. Prepare pigment phase C: wet pigments into Cetiol CC and Emulium Illustro and run through the 3-roll mill three times. Check dispersion. Add phase C into phase A+B and homogenize with rotor stator. Prepare water phase D and solubilize the salts. Proceed with the emulsion of water phase D added slowly into oil phase A+B+C under rapid mixing. Then increase to high shear (rotor/stator 3,000 rpm) for 10 minutes. Add one by one separately phases E, F and G. Keep medium mixing and check the correct incorporation of every phases.

Note

Aspect: Liquid beige emulsion. >97% natural origin (ISO 16128). Viscosity: Brookfield RV (spindle A, speed 5): approximately 6,200 mPa.s after 24 hours.

Request more information from Gattefosse Corporation