Skin Care, Sun Care

Silky Face Moisturizing Lotion

Released By Nouryon

Silky Face Moisturizing Lotion
Ingredients
%

Phase A

  • Deionized water
  • 68.55

0

  • Pricerine 9091 (Croda, Inc.) (Glycerin)
  • 7.00
  • Euxyl PE 9010 (Schu00fclke & Mayr GmbH) (Phenoxyethanol (and) ethylhexylglycerin)
  • 0.80
  • Structure CEL 4400 E (AkzoNobel Global Personal Care)(Hydroxyethyl ethylcellulose)
  • 0.15
  • Lipol-VOL A (Lipo Chemicals) (Refined avocado oil) (Persea gratissima (avocado) oil)
  • 3.00
  • Dermol IPM (Alzo Inc.) (Isopropyl myristate)
  • 5.00
  • Floramac Macadamia Oil (Floratech) (Refined macadamia integrifolia seed oil)
  • 3.00
  • Emcon Sun - Org (Fanning Corp) (Helianthus annuus (sunflower) seed oil)
  • 3.00
  • Dow Corning 200 Fluid (5 CST) (Dow Corning Corp.) (Dimethicone)
  • 1.00
  • Triethanolamine-99% (Ashland Chemical)
  • 0.30

Phase B

  • Arlacel 165 (Croda, Inc.) (Glyceryl stearate (and) PEG-100 stearate)
  • 2.00

Phase C

  • Carbopol 940 (Lubrizol Advanced Materials)
  • 0.20

Phase D

  • Deionized water
  • 1.00

Phase E

  • Dry-Flo TS starch (AkzoNobel Global Personal Care) (Tapioca starch polymethylsilsesquioxane)
  • 5.00

Procedure

In main beaker, add deionized water, glycerin, and Euxyl PE 9010. Mix on Silverson homogenizer at low to moderate speed (2000-3000 rpm) and begin heating to 75-80°C. Sprinkle in Structure CEL 4400E and homogenize at low to moderate speed (2000-3000 rpm) until fully hydrated. In a side beaker, add phase B ingredients and mix on propeller @ 300 rpm. Heat to 75-80°C. Once phase A and phase B reach desired temperature, add Phase B to phase A with homogenization at 4000 rpm. Mix for 10 minutes, then begin cooling to 65°C. When batch reaches 60-65°C, sprinkle in Carbopol and homogenize at 4000 rpm for 10 minutes until hydrated. Continue batch mixing at 4000 rpm and pre-mix Phase D. Add to main batch after Phase C has mixed and fully hydrated for 10 minutes. Cool batch to 45°C. Continue batch mixing at 4000 rpm. Once phase D is fully dissolved, add phase E and mix until dispersed and uniform. Switch batch to overhead sweep mix blade at low speed (20 rpm) and cool to 25°C.

Properties

pHu20146.90-7.40; Appearanceu2014white cream; Viscosity 16000-24000 cps (Brookfield RVT, Spindle C, Speed 10, 1 minute).

More Information

AkzoNobel Surface Chemistry Global Personal Care
888-331-6212
Fax: 908-707-3664
Email: personalcare.usa@akzonobel.com

Europe: +41 (0)41-469-69-66
Fax: +41 (0)41-469-69-06
Email: personalcare.europe@akzonobel.com
Website: www.akzonobel.com/PersonalCare

Request more information from Nouryon